- Reviews (0)
Lubrication Pump DDB-10
Lubrication pump DDB-10 is a multi-point grease injection pump with 10 grease feeding outlet ports, available for grease central lubrication system in small, single or progressive equipment. The construction of lubrication pump is piston injection feeding with 10 grease ports (Or less, it can be sealed if some ports are not necessary at the moment), this lubrication pump is usually connected with block type dividers to meet various requirements of lubrication.
The installation of lubrication pump DDB-10 is pretty easy, just connecting each pump injector with steel or plastic piping with connector, then dispensing each grease feeding port to different lubrication required points, the grease transportation tubes would be fixed by rivets or straps. The DDB-10 pump is available for the medium of penetration not less than 265 (25, 150g) 1 / 10mm grease (NLGI0 # ~ 2 #), the recommended temperature of operation ambient is better keeping between 0~40 .
It is necessary to clean the injector of lubrication pump and inlet port of grease lubrication system before filling grease in the grease reservoir, following the procedures to fill grease in DDB-10 pump and test the motor rotation of lubrication pump and each junction points after the completion of connection between lubrication pump and lubrication system or divider valves. The DDB-10 pump has been proved that multi-point lubrication pump can improve the work efficiency 5-time above if comparing with conventional lubrication methods, saving 2/3 lubricants, reduce maintenance costs about three times, extending service life of wear-out parts, the lubrication pump has characteristics of simple construct, easy to operate and installation, safe working, clean and other characteristics of lubricating oil and no special requirements for routine lubrication maintenance provides an effective way to work , but also for the efficient, fast, energy-efficient and safe for production and construction environment.
Description of grease lubrication pump:
Lubrication Pump Part List:
1. Electric motor ; 2. Inner worm; 3. Gear worm shaft; 4-5-6. Gears; 7. Eccentric shaft; 8. Connection Pin; 9. Driven disk; 10.Inner piston; 11. Grease driven plate; 12. Grease stirring rod
Lubrication Pump DDB-10 Technical Data:
|Max. Pressure||Feeding Points||Piston Stroke||Stroke Adjustable||Feeding Volume|
|Feeding Time||Tank Volume||Motor||Weight|
|13 time/min||7L||0.37Kw, 1380r/min, 380V||38Kgs||1232|
Lubrication Pump DDB-10 Dimensions: